To Next PageTo Next Page
Need help?Do you have a question about the Delta 28-682 and is the answer not in the manual?
Specific safety warnings related to California Proposition 65.
Procedures for safely unpacking and cleaning the machine.
Instructions for installing the power switch assembly.
Steps for mounting and adjusting the machine's table.
Instructions for attaching and positioning the fence.
Procedures for installing the table insert and fence extension.
Procedures for turning the band saw on and off.
How to secure the machine when not in use.
Adjusting the table angle for different cuts.
How to set the correct tension for the saw blade.
Fine-tuning the blade alignment on the wheels.
Procedures for adjusting the machine's speed settings.
Setting up the upper blade guides and support bearings.
Setting up the lower blade guides and support bearings.
Calibrating the 90-degree table stop.
Step-by-step guide for replacing the saw blade.
How to set the resaw gauge for specific cuts.
Procedures for adjusting the motor belt tension.
Information on connecting dust collection systems.
General guidelines for operating the band saw.
Techniques for making curved cuts.
Routine cleaning and lubrication procedures for the machine.
Methods for preventing rust on cast iron surfaces.
How to obtain parts, service, or warranty support.
General
