Delta 36-751 - 10 Power Miter Saw; Model 36-070 10 Power Miter Saw; Specifications

21
10” Power Miter Saw
SPECIFICATIONS
Power. Capacity. Portability.
Everything you could ask
for in a miter saw!
•
Convenient miter indexing control with
positive stops at 0°, 22
1
⁄2° and 45° R&L.
Easy-to-read scale for in-between
angles is accurate to
1
⁄2°.
•
Extra-wide one-piece fence for
maximum support of wide materials.
•
See-through blade guard covers blade
at all times; automatically retracts as cut
is being made.
•
Electric blade brake automatically stops
blade in seconds.
•
Pre-drilled base holes for easy bench
mounting.
Model 36-070 10Ó Power Miter Saw. Includes
basic machine with 13 amp., 120V, 60 Hz.
motor; 6Õ 3-conductor cord with ground-type
plug, electric blade brake, 10Ó dia. saw blade,
retractable saw blade guard, dust bag, wrench-
es and instruction manual.
Model 36-070
10Ó Power Miter Saw
Motor ........................................................... 13 amp., 120V, 60 Hz.
Blade:
Diameter .................................................................... 10Ó (254 mm)
Arbor .............................................................................
5
⁄8Ó (16 mm)
Speed ............................................................................... 5200 rpm
Capacity:
Crosscut ................................................. 5
3
⁄4Ó x 2
1
⁄4Ó (146 x 57 mm)
3
3
⁄4Ó x 3
3
⁄4Ó (95 x 95 mm)
Miter at 45° R&L .................................... 4
1
⁄8Ó x 2
1
⁄4Ó (105 x 57 mm)
3
1
⁄2Ó x 3
1
⁄8Ó (89 x 79 mm)
Fence Size R&L ................................... 2
1
⁄2Ó x 7
7
⁄8Ó (64 x 200 mm)
Table:
Diameter .................................................................... 11Ó (279 mm)
Sides ........................................................................... 3
1
⁄4Ó (83 mm)
Miter stops ................................................... 0°, 22
1
⁄2° and 45° R&L
Overall Dimensions:
Height ..................................................................... 20
1
⁄4Ó (514 mm)
Width ...................................................................... 17
3
⁄4Ó (451 mm)
Depth ........................................................................... 32Ó (81 mm)
Weight ...................................................................... 28 Ibs. (13 kg)
®
13 amp., 5200 rpm motor provides plenty
of power and speed for tough cutting jobs.
Crosscuts a nominal 2 x 6
or 4 x 4 at 90°. Miters a 2 x 4 flat or on
edge in a single pass, at 45°.
Constructed of a lightweight aluminum
alloy—weighs only 28 Ibs. for easy carrying
from job to job.
For accessories, see page 29