Delta 36-751 - 12 Radial Saw; Model 33-890 12 Radial Saw with 2 HP Motor for Single Phase Operation; Model 33-891 12 Radial Saw with Low Voltage Control; Specifications

25
12” Radial Saw
SPECIFICATIONS
Built for capacity with
versatility.
•
Unique turret arm action permits
saw blade to rotate 360° above
work table.
•
Built-in mechanical brake stops
blade in seconds.
•
The rigid channel cast iron frame
and heavy column are virtually
distortion-proof for perfect align-
ment and continued accuracy.
•
Full 3
3
⁄4Ó depth of cut at 90°, 2
1
⁄2Ó
at 45° blade tilt. Crosscuts 14
3
⁄8Ó
in a single pass.
•
Precision indexing with positive
stops for 90° and 45° miter cuts
is precision machined for lifetime
accuracy.
Model 33-890 12Ó Radial Saw with
2 HP Motor for Single Phase
Operation. Includes basic machine
with 230V, 60 Hz., 3450 rpm motor;
on-off, key lock switch and overload
protection, set of legs, automatic
mechanical brake, blade guard with
anti-kickback attachment, retractable
leaf guard, 12Ó combination blade and
wrenches.
Model 33-891 12Ó Radial Saw with
Low Voltage Control. Same as 33-890
except with 24V at on-off, key lock
switch, magnetic starter, transformer
and overload protection (LVC).
Model 33-892 12Ó Radial Saw with 2
HP Motor and Low Voltage Control
for Three Phase Operation. Includes
basic machine with 200-230/460V,
60 Hz., 3450 rpm motor, 24V at on-off,
key lock switch, magnetic starter, trans-
former and 3-leg overload protection
(LVC), set of legs, mechanical brake,
blade guard with anti-kickback attach-
ment, retractable leaf guard, 12Ó com-
bination blade and wrenches.
Model 33-890
12Ó Radial Saw
Unique “Turret Arm” Action.
Permits saw blade to rotate a
full 360° above work table—
gives full table capacity for left
and right hand miters.
Powerful Motor with Mechanical Brake.
2 HP motor develops up to 4 HP peak
under heavy workloads. Mechanical brake
that’s built into motor, stops blade auto-
matically in seconds, after switch is turned
off.This eliminates excessive blade coast-
ing enabling production schedules to be
maintained.
Motor:
Horsepower .............................................................................. 2 HP
Speed ............................................................................... 3450 rpm
Blade:
Diameter (supplied) ................................................... 12Ó (305 mm)
Arbor ...................................................
5
⁄8Ó—12 L.H. Acme (16 mm)
Capacity:
Max. depth of cut
(less leaf guard) ........................................................ 3
3
⁄4Ó (95 mm)
(with leaf guard) ........................................................ 3
3
⁄4Ó (95 mm)
Dado Capacity.............................................................
13
Ú16Ó (21 mm)
Max. depth of cut at 45° bevel,
(less leaf guard) ......................................................... 2
1
⁄2Ó (64 mm)
(with leaf guard) ......................................................... 1
1
⁄4Ó (32 mm)
Crosscut ................................................................. 14
3
⁄8Ó (365 mm)
Rip .......................................................................... 24
1
⁄4Ó (616 mm)
Bevel Positive Stops ................................................ 0°, 45° and 90°
Miter Positive Stops ............................................ 90° and 45° R & L
Table Size ........................................... 25
1
⁄2Ó x 30Ó (635 x 762 mm)
Overall Dimensions ........................................... 30Ó x 32Ó x 63
1
⁄2Ó
(762 x 813 x 1612 mm)
Weight .................................................................. 300 Ibs. (136 kg)
For accessories, see page 29