106
You can enable specific UPS functions through the Control Menu. Please refer to the table below
for more information.
Level 1 Level 2 Level 3 Level 4
Control
Charger
Execute Boost Charge No/ Yes
Alarm
Clear Prediction Warning
No/ Yes
*
1
NOTE:
*
1
The item
Delay Alarm Again
can be set from 1 week to 52 weeks; you can access
from →
Alarm
→
Clear Prediction Warning
→
Yes
. You need to go to
Setting
Menu
→
Component Life Prediction
→ select
Yes
. You can perform ‘Clear Prediction
Warning’ when the alarm is triggered only after the setting has been done.
If you need to charge the batteries in boost mode, please go to
→ Charger → Execute
Boost Charge → Yes
.
To Next Page
Loading...
Need help?
General