Amplon RT Series 111
Chapter 11 : Optional Accessories
There are several optional accessories available for the RT series UPS. Please refer to the table
below for the optional accessories and their functions.
No. Item Functions
1 Dust Filter
Prevents dust from entering into the UPS to ensure UPS
reliability and to prolong product lifespan.
2 Mini SNMP IPv6 Card
Monitors and controls the status of the UPS via a network
system.
3 Mini Relay I/O Card Increase the number of dry contacts.
4 Mini MODBUS Card Lets the UPS have MODBUS communication function.
5
Delta Lead-acid Battery
Pack
Provides lead-acid batteries to the UPS so that the unit can
continue supplying power to its connected loads when a
power outage occurs.
6
Delta Lithium-ion
Battery Pack (RT-20K-
LIB/
RT-10K-LIB)
Provides lithium-ion batteries to the UPS so that the unit can
continue supplying power to its connected loads when a
power outage occurs.
7
Maintenance Bypass
Box (MBB) for single
UPS
Lets the UPS continue supplying power (single-phase output
or three-phase output) to its connected loads when the UPS
is under maintenance.
8
Power Distribution Box
(PDB) for single UPS/
parallel UPSs
A 3U power distribution box, which can be connected to the
single UPS or two parallel UPSs to provide (1) single-phase/
three-phase output and (2) manual bypass function for
maintenance. The PDB also provides four IEC-320 C13
outlets and two IEC-320 C19 outlets to meet your power
distribution needs.
9
Rack Remote Power
Panel (rRPP)
A 3U power distribution box, which can be connected to the
UPS or PDB. The rRPP (1) provides single-phase/ three-
phase output, (2) can monitor the voltage and current
provided to the loads, and (3) have communication function.
10 Rail Kit Fixes the UPS in a rack cabinet.