84
1. Battery Replacement Procedures_ Delta Lead-acid Battery Pack (Optional)
() Remove the screws and the battery pack’s front panel.
(
) Disconnect the battery input terminals.
(
) Use a Phillips screwdriver to remove the screws on the protection cover in front of the battery
module. Then, remove the protection cover.
(
) Extract the battery module from the compartment and replace it with a new one.
NOTE:
Moving the battery module (weight: 28 ± 1 kg (61.7 ± 2.2 lbs)) requires two people.
To reassemble the battery pack, please perform the steps (
) ~ (
) above in reverse sequence.
To Next Page
Loading...
Need help?
General