Error
code
Description
CPU
status
ERROR LED indicator
ON
0050
The memories in the latched special auxiliary relays
are abnormal.
Continue V
The latched special data registers are abnormal.
0052
The memories in the latched auxiliary rel
abnormal.
Continue V
0054 The latched counters are abnormal. Continue V
The latched 32-bit counters are abnormal.
The latched special auxiliary relay is abnormal.
The latched data registers are abnormal.
The CPU module does not detect a memory card.
The memory card is initialized incorrectly.
0063
An error occurs when data is written to the memory
card.
Continue V
0064 A file in the memory card cannot be read. Continue V
0070
The actual placement of the function cards is not
consistent with the settings.
Stop V
0102 The interrupt number exceeds the range. Stop V
The MC instruction exceeds the range.
The MCR instruction exceeds the range.
0D03
The operands used in DHSCS are not used
Stop V
0E05
The operands HCXXX used in DCNT are not used
Stop V
1000
-
System error Stop V
1300
-
130F
Errors occurred in the remote modules Continue V
1402
The arrangement of the I/O modules is not
consistent with the settings.
Stop V
140B
The number of connected communication modules
exceed the maximum number 4.
Stop V
140C
The number of connected positioning modules
exceed the maximum number 8.
Stop V
140D
The number of connected extension modules
exceed the maximum number 32.
Stop V
140E
Number of remote modules exceeds the limit of
eight on the right side of the CPU module.
Stop V
1500 Connection lost in the remote modules Continue V
1502
-
Errors occurred in the remote modules Continue V
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
To Next Page
Loading...
Need help?
General
