6.4
Hardware Configuration
After you double-click
HWCONFIG
in the project management area, the
HWCONFIG
window appears.
In the
HWCONFIG
window, the default setting is for a CPU module. Refer to Chapter 8 for more information
on settings for other types of modules.
When the hardware configuration is complete, download the configuration and the settings to the CPU module
to take effect. Save the configuration and settings now, and you can download them with the program later in
the project. After that close the
HWCONFIG
window.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
To Next Page
Loading...