3. Set up the IP address
Double-click the listed MAC address for your device to open the Input Data dialog box.
Enter the IP address and click OK.
4. Disable DHCP/BOOTP
Click the device in the Exchange Table that you want to disable, then click Disable DHCP/BOOTP. The selected
device does not send DHCP/BOOTP requests. To change the IP address receiving mode, refer to Section 9.4.2.2
for more information.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
To Next Page
Loading...