Set up the sample period and trigger setting.
After setting up the parameters, click on the icon toolbar to have the system in the online mode. Then click
to download the settings to the PLC.
After the sample parameter settings in the data tracer are completed and downloaded, any of the following three
modes on the icon toolbar can be used for watching curves in the online mode.
Click on the icon toolbar to export the data to your computer for future use.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
To Next Page
Loading...