How to resolve CANopen PDO is read-only and write-protected in Delta Servo Drives?
To resolve CANopen PDO is read-only and write-protected in Delta Servo Drives, when the specified object in the message is write- protected, use NMT: Reset node or 0x6040.Fault Reset.
How to resolve CANopen PDO is not allowed in PDO in Delta ASD-A2-1521 Servo Drives?
To resolve CANopen PDO is not allowed in PDO in Delta Servo Drives, when the specified object in the message does not support PDO, use NMT: Reset node or 0x6040.Fault Reset.
How to fix Parameter group of PR#8 is out of range in Delta ASD-A2-1521?
To fix parameter group of PR#8 is out of range in Delta Servo Drives, when the parameter group of command source exceeds the range, use DI.Alm Reset or write 0 into P0-01.
How to fix The parameter number of PR#8 is out of range in Delta ASD-A2-1521 Servo Drives?
To fix the parameter number of PR#8 is out of range in Delta Servo Drives, when the parameter number of command source exceeds the range, use DI.Alm Reset or write 0 into P0-01.
How to fix An error occurs when writing parameter via PR exceeds the range in Delta Servo Drives?
To fix an error occurs when writing parameter via PR exceeds the range in Delta Servo Drives, when an error occurs when writing parameters, use DI.Alm Reset or P0-01 = 0.
How to resolve CANopen PDO is write-protected when Servo On in Delta ASD-A2-1521?
To resolve CANopen PDO is write-protected when Servo On in Delta Servo Drives, when the specified object in the message is write- protected when Servo ON, use NMT: Reset node or 0x6040.Fault Reset.
How to resolve Error occurs when reading CANopen PDO via EEPROM in Delta ASD-A2-1521 Servo Drives?
To resolve error occurs when reading CANopen PDO via EEPROM in Delta Servo Drives, when an error occurs when loading the default value via ROM at start-up, use NMT: Reset node or 0x6040.Fault Reset.
How to resolve Error occurs when writing CANopen PDO via EEPROM in Delta ASD-A2-1521 Servo Drives?
To resolve error occurs when writing CANopen PDO via EEPROM in Delta Servo Drives, when an error occurs when saving the current value into ROM, use NMT: Reset node or 0x6040.Fault Reset.
How to resolve The accessing address of EEPROM is out of range when using CANopen PDO in Delta Servo Drives?
To resolve the accessing address of EEPROM is out of range when using CANopen PDO in Delta Servo Drives, when the quantity of the data inside ROM is over the planned space, use NMT: Reset node or 0x6040.Fault Reset.
How to resolve CRC of EEPROM calculation error occurs when using CANopen PDO in Delta ASD-A2-1521 Servo Drives?
To resolve CRC of EEPROM calculation error occurs when using CANopen PDO in Delta Servo Drives, when it indicates that the data stored in ROM has been damaged, use NMT: Reset node or 0x6040.Fault Reset.
General| Model | ASD-A2-1521 |
|---|---|
| Output Power | 1.5 kW |
| Motor Power | 1.5 kW |
| Protection Class | IP20 |
| Type | AC Servo Drive |
| Communication Protocol | RS-485, CANopen |
| Protection Features | Over Voltage, Over Current, Overload, Overheat, Low Voltage, Short Circuit |
To Next Page
