24 LTL-XL Retroreflectometer DELTA
Auto Off (Power)
To save power, the instrument can be programmed to automatically turn off if not used for a
while.
Press the MENU button and select SETTINGS / POWER / AUTO OFF. Use UP and DOWN to edit
the auto turn off time. The off time can be set from 1 to 8 hours in intervals of 1 hour or it can
be deactivated (OFF). Press OK, LEFT or BACK to accept.
The LTL-XL will not turn off when either the power supply or a PC is connected.
When communicating with RSC program or when the power supply is connected the instru-
ment will not power down automatically. The startup time will be approx. 10 seconds.
Setting the language
Press the MENU button and select SETTINGS / LANGUAGE. Use the UP or DOWN button to
select a language. Accept by pressing the OK button or leave unchanged by pressing BACK.
Setting the temperature unit
Press the MENU button and select SETTINGS / TEMPERATURE. Use the OK button to select be-
tween Celsius and Fahrenheit. Accept by pressing the BACK button.
Setting the SMART key function
This button is user programmable to one of several functions, e.g. to clear the last meas-
urement. Press the MENU button and select SETTINGS / SMART.
Use the UP or DOWN button to select the SMART KEY function. Accept by pressing the
OK button.
The selected function is now accessed every time is pressed
Using GPS (optional)
The GPS system, if installed, is used to log position data (latitude and longitude) to the log
together with the measurement data.
If the GPS is activated the GPS icon is shown in the upper icon row
To Next Page
Loading...
Need help?
General
