DELTA LTL-XL Retroreflectometer 43
Printer (optional)
The printer is located at the back of the tower. The printer is a high-speed high quality mini
thermal printer. It has only a few moving parts and does not require any special or periodic
maintenance.
The printer uses a thermal paper roll, width: 57.5±0.5 mm (2.26 in), diameter: max. 31 mm
(1.22 in)
Replacing paper
Pull the lever out with your finger and the cover will open into the paper roll compartment.
Insert the new paper roll and let a short paper tail hanging out at the top. Close the cover with
a firm push and with some of the paper sticking out.