Delta RPI M50A

5.2.5. Inverter Information
This page can helps user to recognize the inverter. First section displays
serial number, installation date, ID, and firmware version. Another 3 sections
displays the settings of inverter functions. For more infromation about
these settings, please refer to 5.2.7 Install Settings, 5.2.8 Active/Reactive
power, and 5.2.9 FRT (Fault ride through).
5.2.6. General Settings
Users can set Language, Date and Time, and RS-485 communication
baud rate in this page.
Figure 5-7 Inverter information page
Figure 5-8 General settings page
Language
Date and Time
Baud Rate
►
ENT
or
S/N: RN11179CB0
Install: 30/04/2014
DSP 1.80 Red. 1.65
Comm. 1.65 ID: 002
ENT
or
AC connection:
Max. Power:
Dry Cont:
EPO:
3P4W
52500W
Insulation
Normal Close
Country:
Insulation:
Baud Rate:
Germany MV
1200k
19200bps
ENT
or
►
Grid Settings
Active Pwr Settings
React Pwr Settings
FRT Settings
Link to settings page but read only
44
Turn on PV inverter