Need help?Do you have a question about the Delta AU Series and is the answer not in the manual?
General| Series | AU Series |
|---|---|
| Category | Inverter |
| Cooling Method | Forced Air Cooling |
| Storage Temperature | -20°C to +60°C |
| Input Voltage | 200-240V |
| Control Method | V/F Control, Sensorless Vector Control |
| Protection Features | Overvoltage, Undervoltage, Overcurrent, Short Circuit |
| Communication Interface | RS485, Modbus |
| Operating Temperature | -10°C to +50°C |
| Humidity | 5% to 95% RH (Non-condensing) |
| Altitude | Up to 1000m |
Explains various safety symbols used in the manual, including danger, warning, caution, and notice.
Provides essential safety instructions for inverter installation and operation, emphasizing qualified personnel.
Discusses the growing importance of renewable energy and the role of solar inverters.
Describes the inverter's integrated interface for operation monitoring and data downloading via PC.
Details the inverter's design, MPP tracking, casing, heat dissipation, and control systems.
Explains the inverter's operating temperature range and the derating curve for output power.
Presents a graph showing the DC voltage input range for different M series inverter models.
Illustrates the inverter's efficiency at various input voltages and output power levels.
Provides an exterior view and description of the main components of the solar inverter.
Details the inverter's model specifications and the location of important safety labels.
Guides on checking the inverter's condition and contents upon delivery, and handling returns.
Lists essential guidelines for installing the inverter, including mounting and clearance requirements.
Provides instructions and diagrams for vertically mounting the inverter and ensuring proper clearance.
Details the procedures for connecting the PV and AC terminals, including wire specifications.
Explains how to install the protective ground wire and the required screw torque.
Reinforces safety precautions for electrical connections, including qualified personnel and PV array handling.
Specifies that M series TL AU inverters are for single-phase grids with 230 Vac nominal voltage and 50 Hz.
Advises on installing external DC switches that meet AS 60947.3 standards per AS/NZS 5033.
Details recommended AC branch protection for each inverter model to prevent fire hazards.
Outlines requirements for installing a grounding conductor and its termination, emphasizing safety.
States that inverters meet surge requirements but recommends external protection due to installation uniqueness.
Addresses conditions for installing multiple inverters at one location, requiring separate protection.
Discusses PV string combinations and voltage limits to ensure optimal performance and safety.
General information and warnings regarding inverter connections, emphasizing qualified electricians.
Provides crucial safety warnings for connecting PV array strings, emphasizing isolation and polarity verification.
Details safety precautions for AC output wiring, including checking disconnects and circuit breakers.
Describes the Power, Fault, and Info LEDs and their indication of inverter status.
Details the LED messages and their corresponding behavior for normal operation, sync, and faults.
Step-by-step guide for safely turning on the inverter, including checking disconnects and breakers.
Step-by-step guide for safely turning off the inverter, including disconnects and breakers.
Introduces the M Series APP for monitoring, configuration, and maintenance via Bluetooth.
Provides a brief overview of the M Series APP's functionality for system communication.
Lists compatibility requirements and the procedure for installing the M Series APP on an Android device.
Guides on connecting the M Series APP to the inverter by displaying and selecting the device.
Displays the menu structure of the M Series APP, showing available functions and navigation.
Details various functions available within the M Series APP for monitoring and managing the inverter.
Explains how to view real-time status, power curves, and system parameters using the app's monitor function.
Describes how to perform an IV scan within the app to view PV and IV curves for system analysis.
Outlines how to access and modify basic and other settings within the M Series APP.
Details the procedure for accessing and reading the error log through the M Series APP.
Explains how to check historical PV and AC data using the M Series APP's history function.
Guides on accessing and editing user information within the M Series APP.
Describes the process of updating the inverter's firmware using a BIN file via the M Series APP.
Outlines the procedure for initiating a Return Merchandise Authorization (RMA) request through the M Series APP.
Warns about hazardous voltage and states that the inverter contains no user-serviceable parts, voiding warranty if opened.
Covers procedures for safely decommissioning, transporting, storing, and disposing of the solar inverter.
Provides step-by-step instructions for safely disconnecting and removing the solar power inverter.
Advises using original or equivalent quality packaging for transport and storage.
Recommends transporting the solar power inverter in its original or equivalent packaging.
Advises storing the solar power inverter in its original packaging and following technical data specifications.
Instructs to dispose of the solar power inverter in a technically appropriate manner according to legal requirements.
Directs users to the website for the most recent certificates and compliance information.
Presents detailed technical specifications for M3-TL-AU, M4-TL-AU, and M5-TL-AU models, including input and output parameters.
To Next Page
