1.2 Safety Instructions
The inverter installation must be performed by an authorized electrician in accordance with the local
and SAI Global AS/NZS 5033:2014.
CAUTION - Risk of Electric Shock. When the PV array is exposed to light, it supplies a DC
voltage to this equipment.
CAUTION - Risk of Electric Shock. Do not remove cover. No user serviceable parts inside.
Refer servicing to qualified service personnel.
CAUTION - Risk of electric shock from energy stored in capacitor. Do not remove cover until 5
minutes after disconnecting all sources of supply.
WARNING - For continuous protection against risk of fire, replace only with same type and
ratings of fuse.
WARNING - The RSD Combiner surfaces may become hot. To reduce the risk of burns, do not
touch them.
CAUTION - Electrical installation and final application in Australian market shall consider the
requirements in AS/NZS 3000, AS/NZS 4777.1 and AS/NZS 5033.
CAUTION - Although DC switch may be integrated in product already, external DC switches
fulfill latest AS 60947.3 have to be installed out of the inverter in way per AS/NZS 5033.
CAUTION - DRM function is carried out by external ancillary equipment eShow, please connect
the equipment according to instruction strictly before use.