4.9.3 Inverter AC output wire connections
WARNING!
AVERTISSEMENT!
– Read all of the instructions, cautions, and warnings for the
Delta M Series Inverter, associated PV array documentation.
– Installation and commissioning must be performed by a
licensed electrician in accordance with local, state, and
AS/NZS 3000 requirements.
– Ensure no live voltages are present on PV input and AC
output circuits, and verify that the DC disconnect, AC
disconnect, and dedicated AC branch circuit breaker are in
the “OFF” position, before inverter installation.
– Verify that dedicated 2-pole 230 Vac circuit
breaker in the building electrical service panel is turned-off.
5 Commissioning the PV system
WARNING!
AVERTISSEMENT!
WARNING!
AVERTISSEMENT!
WARNING!
AVERTISSEMENT!
Read all of these instructions, cautions, and warnings for the
Delta M series inverter and associated PV array documentation.
Installation and commissioning must be performed by a licensed
electrician in accordance with local, state, and AS/NZS 4777
requirements.
Verify that the dedicated 2-pole 230 Vac circuit breaker
in the building electrical service panel is turned-off.