Delta VFD150C43A User Manual

Chapter 1 IntroductionC2000 Series
1-1
Chapter 1 Introduction
1-1 Receiving and Inspection
After receiving the AC motor drive, please check for the following:
1. Please inspect the unit after unpacking to assure it was not damaged during shipment. Make sure that
the part number printed on the package corresponds with the part number indicated on the
nameplate.
2. Make sure that the voltage for the wiring lie within the range as indicated on the nameplate. Please
install the AC motor drive according to this manual.
3. Before applying the power, please make sure that all the devices, including power, motor, control
board and digital keypad, are connected correctly.
4. When wiring the AC motor drive, please make sure that the wiring of input terminals “R/L1, S/L2, T/L3”
and output terminals”U/T1, V/T2, W/T3” are correct to prevent drive damage.
5. When power is applied, select the language and set parameter groups via the digital keypad
(KPC-CC01). When executes trial run, please begin with a low speed and then gradually increases
the speed untill the desired speed is reached.
1-2 Nameplate Information
MODEL:VFD007C43A
INPUT:
Normal Duty: 3PH 380-480V 50/60Hz 4.3A
Heavy Duty: 3PH 380-480V 50/60Hz 4.1A
OUTPUT:
Ver si on :
FREQU ENCY RA NGE:
Normal Duty: 3PH 0-480V 3A 2.4KVA 1HP
Heavy Duty: 3PH 0-480V 2.9A 2.3KVA 1HP
Normal Duty: 0 -59 9Hz
Heavy Duty: 0-300Hz
VX.XX
007C43A7T14300002
DE LTA EL ECTRONICS. INC .
MA DE IN XXXXXX X
AC Drive Model
Input Voltage/Current
Output Voltage/Current
Frequency Range
Firmware Version
Certif cations
Serial Number
Enclosure type (IPXX)
i

Delta VFD150C43A Specifications

General

Brand	Delta
Model	VFD150C43A
Category	Media Converter
Language	English

Summary

1-1 Receiving and Inspection

1-2 Nameplate Information

1-3 Model Name

1-4 Serial Number

1-5 RFI Jumper

1-6 Dimensions

Frame B Dimensions

Frame C Dimensions

Frame D0 Dimensions

D0-1: VFD370C43S; VFD450C43S;

Dimensions and specifications for Frame D0, model variant D0-1, covering specific AC Drive models.

Frame D0 Dimensions

D0-2: VFD370C43U; VFD450C43U;

Dimensions and specifications for Frame D0, model variant D0-2, covering specific AC Drive models.

Frame D Dimensions

D1: VFD300C23A; VFD370C23A; VFD550C43A; VFD750C43A

Dimensions and specifications for Frame D, model variant D1, covering specific AC Drive models.

Frame D Dimensions

D2: VFD300C23E; VFD370C23E; VFD550C43E; VFD750C43E

Dimensions and specifications for Frame D, model variant D2, covering specific AC Drive models.

Frame E Dimensions

E1: VFD450C23A; VFD550C23A; VFD750C23A; VFD900C43A; VFD1100C43A

Dimensions and specifications for Frame E, model variant E1, covering specific AC Drive models.

Frame E Dimensions

E2: VFD450C23E; VFD550C23E; VFD750C23E; VFD900C43E; VFD1100C43E

Dimensions and specifications for Frame E, model variant E2, covering specific AC Drive models.

Frame F Dimensions

F1: VFD900C23A; VFD1320C43A; VFD1600C43A

Dimensions and specifications for Frame F, model variant F1, covering specific AC Drive models.

Frame F Dimensions

F2: VFD900C23E; VFD1320C43E; VFD1600C43E

Dimensions and specifications for Frame F, model variant F2, covering specific AC Drive models.

Frame G Dimensions

G1: VFD1850C43A; VFD2200C43A

Dimensions and specifications for Frame G, model variant G1, covering specific AC Drive models.

Frame G Dimensions

G2: VFD1850C43E; VFD2200C43E

Dimensions and specifications for Frame G, model variant G2, covering specific AC Drive models.

Frame H Dimensions

H1: VFD2800C43A; VFD3150C43A; VFD3550C43A; VFD4500C43A

Dimensions and specifications for Frame H, model variant H1, covering specific AC Drive models.

Frame H Dimensions

H2: VFD2800C43E-1; VFD3150C43E-1; VFD3550C43E-1; VFD4500C43E-1

Dimensions and specifications for Frame H, model variant H2, covering specific AC Drive models.

Frame H Dimensions

H3: VFD2800C43E; VFD3150C43E; VFD3550C43E

Dimensions and specifications for Frame H, model variant H3, covering specific AC Drive models.