Delta VFD2A7ME43ANSAA

Chapter 12 Description of Parameter SettingsME300
12.1-02-2
Setting value: 4
Two-wire
Quick Start
Setting value: 5
Two-wire
Quick Start
Setting value: 6
Three-wire
Quick Start
Multi-function Input Command 1 (MI1)
Multi-function Input Command 2 (MI2)
Default: 0
Multi-function Input Command 3 (MI3)
Default: 1
Multi-function Input Command 4 (MI4)
Default: 2
Multi-function Input Command 5 (MI5)
Default: 3
Settings 0: No function
1: Multi-step speed command 1 / multi-step position command 1
2: Multi-step speed command 2 / multi-step position command 2
3: Multi-step speed command 3 / multi-step position command 3
4: Multi-step speed command 4 / multi-step position command 4
5: Reset
6: JOG operation (by KPC-CC01 or external control)
7: Acceleration / deceleration speed inhibit
8: The first and second acceleration / deceleration time selection
9: The third and fourth acceleration / deceleration time selection
10: EF input (Pr.07-20)
11: B.B. input from external (Base Block)
12: Output stop
13: Cancel the setting for auto-acceleration / auto-deceleration
time
15: Rotating speed command from AVI
18: Forced to stop (Pr.07-20)