DEMA D6B Series User Manual

NO.6 Detailed Function Description
40
P053
03
Output function of terminals
FA, FB and FC
01: Indications during
running
Contact is enabled in case of output or running indication
from inverter.
02: Zero-speed indication
Contact is enabled if output frequency is less than
start-up frequency.
03: Fault indication
Contact is enabled in case inverter is abnormal.
04: DC braking indication
Contact is enabled if inverter is under DC braking
condition.
05: Set frequency reaching
indication
Contact is enabled if output frequency reaches set
frequency.
06: Underway acceleration
indication
Contact is enabled if inverter is under accelerating
condition.
07: Underway deceleration
indication
Contact is enabled if inverter is under decelerating
condition.
08: Frequency consistency I
arrival indication
Contact is enabled if output frequency reaches
designated frequency (P60).
09: Frequency consistency II
arrival indication
Contact is enabled if output frequency reaches
designated frequency (P61).
10: Motor overload warning
indication
Contact is enabled if motor overload is detected by the
inverter.
11: Torque rich detection
indication
Contact is enabled if torque rich is detected by the
inverter.
12: Inverter overload
warning indication
Contact is enabled if overload is detected by the inverter.
13: Pulse set counter
reaching indication
Contact is enabled if count value reaches set value
(P065) when external counter is executed.
14: Pulse medium counter
reaching indication
Contact is enabled if count value reaches set value
(P066) when external counter is executed.
15: External control timer I
reaching indication
Contact is enabled if timer I reaches set value.
16: External control timer II
reaching indication
Contact is enabled if timer II reaches set value.

DEMA D6B Series Specifications

General

Brand	DEMA
Model	D6B Series
Category	Inverter
Language	English