MATRIX control panel Operating MATRIX control panel
PR-2011-0110-GB • Subject to modifications • R9-03-2016 51
Week program submenu
Entries are made in the “week program” submenu:
– for enabling or disabling the week program (without changing switching times)
– for more details see "Enabling menu options" on page 37.
– for deleting the week program (with confirmation prompt) –
for more details see "Deleting settings" on page 37
– for the switching pattern
Monday - Friday
Saturday - Sunday
as well as on each day of the week.
You can enter a maximum of four switching times for each day:
These switching times are entered either for
– All week days:
Switching times that are entered in the “all week days” menu option are valid
for all week days without further entries. They are automatically copied into all
following menu options of the clock timer. Previous entries are then overwrit-
ten. After entries in the “all week days” menu option have been made it is pos-
sible to overwrite these switching times by entries in the further clock timer
menu options.
– Monday - Friday:
Switching times that are entered in the “Monday - Friday” menu option are val-
id between Monday and Friday without further entries. They are automatically
copied into the following “Monday” to “Friday” clock timer menu options. Pre-
vious entries are then overwritten.
– Saturday - Sunday:
Switching times that are entered in the “Saturday - Sunday” menu option are
valid between Saturday and Sunday without further entries. They are automat-
ically copied in the following "Saturday" and "Sunday" menu items of the timer.
Previous entries are then overwritten.
– Monday [2/4] . . . Sunday [0/4]
These switching times apply individually for each day of the week.
The identification [2/4] after the day of the week has the following meaning:
Week program
Enable/disable
Delete program
All week days
Monday - Friday
2 x switching into the “normal mode“ (day operation) and
2 x switching into the “economy mode“ (night operation)
DESIGNATION Meaning
[0/4] Out of maximum four possible switching times no time
is assigned.
To Next Page
Loading...
Need help?
General
