DencoHappel MATRIX OP21C User Manual

MATRIX control panel Operating MATRIX control panel
PR-2011-0110-GB • Subject to modifications • R9-03-2016 81
7.21.8 Full blocking submenu
If you select the "Full blocking" menu option in “Additional menus”, you have to
enter your password first.
Factory setting: 0000
Now the basic menu with a key is displayed. Operation is no longer possible.
Cancel full blocking
If you activate one of the buttons or the navigator, the password menu opens
again. Enter your password to cancel the full blocking.
7.21.9 Partial blocking submenu
If you select the menu item "Partial blocking" in the "additional menus" menu, then
you first have to enter your password.
Factory setting: 0000
The partial blocking refers to the menu "Additional menus"; "Error list", "Actual
values", "Full blocking" and "Partial blocking" are only displayed here.
Cancel partial blocking
If you select the menu item "Partial blocking" in the menu "Additional menus", the
password menu once again opens. Enter your password to cancel the partial
blocking.
****
Full blocking
Enter password
****
Partial blocking
Enter password
Other menus
Error List
Actual values
Complete blocking
Partial blocking

DencoHappel MATRIX OP21C Specifications

General

Brand	DencoHappel
Model	MATRIX OP21C
Category	Controller
Language	English