What causes instruments to sound reversed during stereo playback on my Denon Stereo Receiver?
This problem is likely due to reversed connections of either the left and right speakers or the left and right input/output cables. Check these connections to ensure they are correct.
General| Channels | 7.1 |
|---|---|
| Total Harmonic Distortion (THD) | 0.08% |
| Frequency Response | 10 Hz - 100 kHz (+1, -3 dB) |
| Signal-to-Noise Ratio | 98 dB |
| Input Impedance | 47 kOhms |
| Input Sensitivity | 200 mV |
| Tuner Bands | AM/FM |
| Audio D/A Converter | 24-bit/192 kHz |
| HDMI Switching | No |
| Power Output (per channel) | 75W (8 ohms, 20Hz-20kHz, 0.08% THD) |
| Tuning Range | FM: 87.5 - 108 MHz |
| Surround Sound Effects | Dolby Digital, DTS |
| Dimensions (W x H x D) | 17.1 x 5.9 x 15.4 inches |
Warning about opening the unit and referring servicing to qualified personnel.
Appliance must not be exposed to rain or moisture.
Set up speaker types and sizes for optimal signal output and frequency response.
Measure distances and set delay times for optimal surround playback.
Adjust channel levels using test tones for balanced playback.
Set speaker delay based on listening position for optimal surround.
Configure speaker types (Front, Center, Surround, Surround Back) and subwoofer presence.
Choose subwoofer mode and set crossover frequency for bass response.
Guide to adjusting channel levels using auto/manual modes and remote.
Select subwoofer mode and crossover frequency for optimal bass response.
Adjust channel levels using test tones for balanced playback.
Identifies front panel controls and their functions with page references.
Diagram and details of the remote control unit's buttons and functions.
Steps to power on the unit and connect speakers.
Illustrates basic connection of speakers for surround sound.
How to select input source, surround mode, and adjust volume.
How to connect speakers, including polarity and impedance considerations.
Diagrams and instructions for video and audio connections.
Using 2-channel playback modes like DIRECT and STEREO.
How to set up and select Dolby Pro Logic IIx modes.
Details on Cinema, Music, Pro Logic, Game modes and their parameters.
How to select and adjust DTS NEO:6 surround modes and parameters.
Details on DTS NEO:6 Cinema and Music modes and their parameters.
Explains Cinema EQ, Dynamic Range Compression, and LFE settings.
Overview of 7 preset surround modes and their features.
Adjusting individual speaker channel levels.
How to set input mode and select Dolby/DTS modes for digital sources.
Settings for D.COMP, LFE, Tone Defeat, Surround Back, and Default.
Options for using surround back speakers (OFF, NON MTRX, MTRX ON, etc.).
Table of common symptoms, causes, and measures.
Explains DTS-ES Discrete 6.1 and Matrix 6.1 formats.
Details on DTS Neo:6 Cinema and Music modes.
Overview of DTS digital surround formats and their features.
Details power output, input sensitivity, and frequency response for audio.
To Next Page
