Denon AVR-1513 User Manual

33
Option Setup
HDMI Default settings are underlined.
Makes settings for HDMI.
Setting items Setting details
HDMI Audio Out
Select HDMI audio output
device.
Amp : Play back through speakers connected to the receiver.
TV : Play back through TV connected to the receiver.
If “TV” is selected, only an HDMI audio signal is output from the TV.
Standby Pass
Outputs signals received
from the HDMI input
connector to the TV
connected to the HDMI
output connector even
when the unit is in standby
mode.
OFF : “Standby Pass” is disabled.
Last : “Standby Pass” is enabled when the last input source used outputs
an HDMI signal.
CBL/SAT : “Standby Pass” is enabled when an HDMI signal is input to
the HDMI CBL/SAT connector on the unit.
Blu-ray : “Standby Pass” is enabled when an HDMI signal is input to the
HDMI Blu-ray connector on the unit.
GAME : “Standby Pass” is enabled when an HDMI signal is input to the
HDMI GAME connector on the unit.
AUX : “Standby Pass” is enabled when an HDMI signal is input to the
HDMI AUX connector on the unit.
When this setting is enabled the power indicator turns red when
entering standby mode, and more power is consumed than in normal
standby mode.
NOTE
When this setting is enabled, the “Sleep timer function” (vpage26) is
turned “OFF” and the “Auto Standby” (vpage33) setting is disabled.
Other Default settings are underlined.
Make various other settings.
Setting items Setting details
Auto Standby
The unit enters standby
mode automatically when
no commands are sent to
the unit for the set time.
Before it enters the standby
mode, “Auto Standby” is
displayed on the display
of this unit and the menu
screen.
2Hours : The unit goes into standby after 2 hours.
4Hours : The unit goes into standby after 4 hours.
8Hours : The unit goes into standby after 8 hours.
OFF : The unit does not go into standby automatically.
Setup Lock
Protect settings from
inadvertent change.
ON : Turn protection on.
OFF : Turn protection off.
To turn OFF the “Setup Lock”, follow the
procedure below.
q Press and hold SETUP for at least 3 seconds.
“Setup Lock:0ON 1” appears on the display.
w Use o p to select “OFF”, and then press
ENTER.
CH LEVEL SLEEP DIMMER SEARCH
MODESHIFT
BANDMEMORYCBL /SAT
Blu-ray
DVD
GAME
AUX
VOLUME
INFO
AUDIO
BACK SETUP
MUTETONERESTORERNIGHT
RC-1170
SURROUND
AUDIO DELAY
TV AUDIO
CHANNEL
TUNE
TUNER
POWER
QUICK SELECT
ENTER
21 3 4
NOTE
When “Setup Lock” is set to “ON”, the settings listed below can no
longer be changed. Also, “Setup Lock!” is displayed if you attempt to
operate related settings.
•Setup menu operations •Channel Level
•RESTORER •Audio Adjust etc.
Basic version
Advanced version
Information
Advanced version
DVD

Denon AVR-1513 Specifications

General

Receiver type	-
Audio output channels	5.1 channels
Audio A/D Converter (ADC)	24-bit/96kHz
Power output per channel (1KHz@6 Ohm)	110 W
Power output per channel (20-20KHz@8 Ohm)	75 W
HDMI in	4
Composite video in	2
Digital audio optical in	1
Connectivity technology	Wired
Ethernet LAN	No
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Radio Data System (RDS)	Yes
Preset stations quantity	56
Supported video modes	1080p, 720p
Analog signal format system	NTSC, PAL
Display	LCD
Product color	Black
Audio decoders	Dolby Pro Logic II, Dolby TrueHD, DTS 96/24, DTS Neo:6, DTS-HD
Apple docking compatibility	Not supported
Graphical user interface (GUI) language	English
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Depth	319 mm
Width	434 mm
Height	151 mm
Weight	7800 g