What does it mean if the power display flashes red on my Denon Stereo Receiver?
If the power display flashes red, it indicates that the Denon Stereo Receiver amplifier circuit has failed. Switch off the power and please contact the DENON service adviser.
What does 'ANTENNA ERROR' mean on my Denon Stereo Receiver in SIRIUS mode?
If you see “ANTENNA ERROR” in SIRIUS mode, it means that the Sirius Tuner is not connected, it will be broken. Check that the connections are correct.
What does 'NO SIGNAL' mean on my Denon Stereo Receiver in SIRIUS mode?
If “NO SIGNAL” is displayed in SIRIUS mode, it indicates that the signal cannot be received. Reposition your SiriusConnect Home Tuner antenna.
What does 'INVALID CHANNEL' mean on my Denon Stereo Receiver in SIRIUS mode?
If “INVALID CHANNEL” appears in SIRIUS mode, it means the channel is not present. Select another channel.
What does 'NO CH AVAILABLE' mean on my Denon Stereo Receiver in SIRIUS mode?
If “NO CH AVAILABLE” is displayed in SIRIUS mode, even when searching categories, it means none of the channels are present because the “Parental Lock” is on (locked). Please search for other categories.
General| Channels | 7.1 |
|---|---|
| HDMI Inputs | 3 |
| HDMI Outputs | 1 |
| Network Connectivity | No |
| Response Bandwidth | 10 Hz - 100 kHz |
| Signal-To-Noise Ratio | 100 dB |
| Total Harmonic Distortion | 0.08% |
| Input Sensitivity | 200 mV |
| Digital Optical Inputs | 2 |
| Digital Optical Output | 1 |
| Digital Coaxial Inputs | 2 |
| Audio Formats Supported | Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD Master Audio |
| Video Formats Supported | 1080p |
| Input Impedance | 47 kOhms |
| Dimensions (W x H x D) | 434 x 151 x 319 mm |
| Power Output | 75W (8 ohms, 20 Hz - 20 kHz, 0.08% THD, 2 channels driven) |
To Next Page
