Denon AVR-1705

27
ENGLISH
3
Set the various surround parameters.
• ROOM SIZE setting
SMALL MED-S
MED MED-L LARGE
oror
ROOM SIZE MED
• EFFECT LEVEL setting
1
10 15
oror
EFFECT LEVEL 10
• DELAY TIME setting
0ms
30ms 110ms
oror
DELAY 30ms
• D.COMP. setting
OFF
LOW MID HIGH
oror
D.COMP. OFF
NOTE:
• This parameter is displayed during DOLBY
DIGITAL playback.
• LFE setting
-10dB
-5dB 0dB
oror
LFE 0dB
4
Press the ENTER button to finish surround parameter mode.
(Remote control unit)
NOTE:
• When making parameter settings, the display will return to the regular condition several seconds after the
last button was pressed and the setting will be completed.
NOTE:
• This parameter is displayed during DOLBY
DIGITAL and DTS playback.
• TONE DEFEAT setting
ON OFF
or
or
TONE DEF. ON
• SURROUND BACK SPEAKER setting
ON OFF
or
or
SB : ON
• DEFAULT setting
YES NO
or
or
DEFAULT Y/N
Select “Yes” to reset to the factory defaults.
The surround mode switches in the following
order each time the DSP SIMULATION button is
pressed:
MONO MOVIE ROCK ARENA
JAZZ CLUBVIDEO GAME
MATRIX
DSP surround simulation
1
Select the surround mode for the input channel.
2
33
4
1
•To operate the surround mode and surround parameters from the remote control unit.
2
To enter the surround parameter setting mode,
press the SURROUND PARAMETER button.
• The surround parameter switches in the
following order each time the SURROUND
PARAMETER button is pressed for the
different surround modes.
(Remote control unit)
(Remote control unit)
ROOM SIZE
EFFECT LEVEL
TONE DEFEAT
SURROUND BACK
DEFAULT
DELAY
TONE DEFEAT
SURROUND BACK
DEFAULT
TONE DEFEAT
DEFAULT
• MONO MOVIE
• ROCK ARENA
• JAZZ CLUB
• VIDEO GAME
• MATRIX • VIRTUAL
If you do want the bass and trable to be adjusted, turn off the tone defeat mode.