Denon AVR-1905 - 12 SURROUND; DTS NEO:6 Mode Operation

DTS NEO:6 mode
5, 74, 6
1 2
1
Select the function to which the component you want to play
is connected.
Example: DVD
FUNCTION
(Main unit) (Remote control unit)
4, 6
5, 7
1
9
5, 7
2
6
6
The DTS NEO:6 Cinema or
Music mode can be chosen
directly by pressing the CINEMA
or MUSIC button on the remote
control unit during playback in
the DTS NEO:6 mode.
• The mode switches as shown below each time the button
is pressed.
DOLBY PLIIx DTS NEO:6
2
Select the DTS NEO:6 mode.
(Main unit) (Remote control unit)
STANDARD
3
Play a program source.
4
Select the surround parameter mode.
SURROUND
PARAMETER
(Main unit) (Remote control unit)
To perform this operation from the remote control unit,
check that the mode selector switch is set to “AUDIO”.
MODE cinema
Display
49
ENGLISH