Denon AVR-1912

8
ENGliSh DEutSch FrANçAiS itAliANo ESpAñol NEDErlANDS SVENSKA
РУССКИЙ POLSKI TÜRKÇE
8
ENGliSh DEutSch FrANçAiS itAliANo ESpAñol NEDErlANDS SVENSKA
Adjusting the master volume
Use M df to adjust the volume.
n When the “Volume Display” setting
(vm page 92) is “Relative”
GAdjustable rangeH
– – –
–80.5dB – 18.0dB
n When the “Volume Display” setting (vm page 92) is
“Absolute”
GAdjustable rangeH
0.0 – 99.0
•The variable range differs according to the input signal and channel
level setting.
You can also operate via the main unit. In this case, perform the
following operations.
Turn MASTER VOLUME to adjust the volume.
Turning off the sound temporarily
Press N.
•The power indicator flashes green.
•“MUTE” indicator on the display lights.
•
appears on a TV screen.
•The sound is reduced to the level set at “Mute Level” (vm
page 92).
•To cancel, press N again. Muting can also be canceled by adjusting
the master volume.
Other operations
See the following items on the included CD-ROM
(Owner’s manual).
nPlaying a Blu-ray Disc player/DVD player
nPlaying a CD player
nPlaying an iPod
®
nTuning in radio stations
nPlaying a network audio
nPlaying a USB memory device
nSelecting a listening mode (Surround mode)
nConvenient functions
nPlayback in ZONE2 (Separate room)
nHow to make detailed settings
nOperating the connected devices by remote
control unit
This completes the basic settings and
operations.
For details on how to change settings
or detailed explanations of operations,
see the included CD-ROM (Owner’s
manual).