Denon AVR-1912E3 User Manual

53
Error
Code
Details of Error code Display Coping strategies
5C
DSP, PLD etc. failed to receive
rmware for rewriting sent from
DM860 (when timed out).
U p d a t i n g f a i l 5 C
Turn off and on the power.
Updating starts automatically.
5D
DSP, PLD etc. failed to receive
rmware for rewriting sent from
DM860 (when an error occurred).
U p d a t i n g f a i l 5 D
Turn off and on the power.
Updating starts automatically.
5E
Data in rmware such as DSP and
PLD for rewriting sent from DM860
was invalid (when a Check Sum error
occurred).
U p d a t i n g f a i l 5 E
Turn off and on the power.
Updating starts automatically.
5F
Invalid data in rmware such as
DSP and PLD for rewriting sent from
DM860 was invalid (invalid data was
received).
U p d a t i n g f a i l 5 F
Turn off and on the power.
Updating starts automatically.
60
NACK was received when "P"
command sent to DSP, PLD etc.
U p d a t i n g f a i l 6 0
Turn off and on the power.
Updating starts automatically.
61
NACK was received when "I"
command sent to DSP, PLD etc.
U p d a t e C h e c k N G 6 1
Turn off and on the power.
Updating starts automatically.
80
Acquisition of serial ash data failed
before serial ash was deleted.
U p d a t i n g f a i l 8 0
Turn off and on the power.
Updating starts automatically.
81
Deleting data failed before serial ash
was rewritten.
U p d a t i n g f a i l 8 1
Turn off and on the power.
Updating starts automatically.
82
Receiving rmware for rewriting serial
ash sent by DM860 failed (when
timed out).
U p d a t i n g f a i l 8 2
Turn off and on the power.
Updating starts automatically.
83
Receiving rmware for rewriting serial
ash sent by DM860 failed (when an
error).
U p d a t i n g f a i l 8 3
Turn off and on the power.
Updating starts automatically.
84
Receiving rmware for rewriting serial
ash sent by DM860 failed (when a
Check Sum error).
U p d a t i n g f a i l 8 4
Turn off and on the power.
Updating starts automatically.
85
Receiving rmware for rewriting serial
ash sent by DM860 failed (when
invalid data was received).
U p d a t i n g f a i l 8 5
Turn off and on the power.
Updating starts automatically.
86
The data verication was invalid after
serial ash was rewritten.
U p d a t i n g f a i l 8 6
Turn off and on the power.
Updating starts automatically.
A0
Acquisition of (Application Mode) IP
address failed before DM860 was
rewritten (AutoIP).
C o n n e c t i o n F a i l A 0
Check the network connection.
Carry out the update in an environment
that has little network load.
A1
Acquisition of (Application Mode) IP
address failed before DM860 was
rewritten (when timed out).
C o n n e c t i o n F a i l A 1
Check the network connection.
Carry out the update in an environment
that has little network load.
A2
Invalid login via DPMS access was
notied when DM860 related rmware
was rewritten (Application Mode).
L o g i n f a i l e d A 2
Check the network connection.
Carry out the update in an environment
that has little network load.

Denon AVR-1912E3 Specifications

General

Brand	Denon
Model	AVR-1912E3
Category	Receiver
Language	English