What to do if my Denon Stereo Receiver power does not turn on, or turns off directly after it was turned on?
If your Denon Stereo Receiver does not turn on, or turns off immediately after being turned on, check that the power cord is securely connected to both the receiver's AC inlet and the wall power outlet.
How to output HDMI audio signals from speakers on my Denon Stereo Receiver?
If HDMI audio signals are not output from the speakers connected to your Denon Stereo Receiver, check that the “Manual Setup” – “HDMI Setup” – “HDMI Audio Setup” – “HDMI Audio Out” setting is set to “AMP” instead of “TV”.
Why my iPod cannot be played on my Denon Stereo Receiver?
If your Denon Stereo Receiver is not playing your iPod, make sure that the input source assigned to “iPod dock” is selected. Check that the cable is properly connected. Ensure that the Control Dock for iPod’s AC adapter is connected to a power outlet.
General| Brand | Denon |
|---|---|
| Model | AVR-2308CI |
| Category | Stereo Receiver |
| Language | English |
Detailed safety instructions to follow during operation and maintenance.
Important precautions to take when handling the audio equipment.
Guidelines for proper and safe installation to ensure optimal performance.
Instructions and diagrams for connecting speakers to the unit.
Detailed steps for connecting speaker cables and protection circuit information.
Information on connecting devices using HDMI for audio/video transfer.
Guide for connecting an iPod using a DENON Control Dock.
Guide to operating the unit using the on-screen menus.
Troubleshooting common error messages during auto setup.
Manually setting speaker size, type, and subwoofer usage.
Selecting low-range signal reproduction for the subwoofer.
Setting speaker distances from the listening position.
Adjusting individual channel levels for balanced volume.
Selecting crossover frequency for subwoofer bass signal handling.
Configuring HDMI audio and video output settings.
Settings for i/p scaler, resolution, aspect ratio, and color space.
Settings for EXT. IN subwoofer level and 2ch direct/stereo modes.
Setting dynamic range for Dolby Digital and auto surround mode.
Configuring audio playback settings for the ZONE2 system.
Accessing various other settings like Amp Assign and Display.
Auto preset, preset skip, and preset name assignment for radio tuning.
Making input mode and decode mode settings for various sources.
Playing multi-channel sources like Dolby Digital and DTS.
Selecting DENON original surround modes for enhanced audio.
Adjusting parameters like Mode, Cinema EQ, and D.COMP.
Adjusting bass, treble, tone defeat, and room equalization.
Restoring compressed audio signals and correcting volume.
Optimizing settings for late-night listening and audio delay.
Assigning amplifiers for different channels for multi-zone playback.
Settings and operations for zone output in multi-zone playback.
Shows signal compatibility and parameter adjustability across surround modes.
Common problems like power issues and no sound from speakers.
Troubleshooting issues related to the remote control unit.
Troubleshooting audio output issues for center, surround, and subwoofer.
Troubleshooting video output issues, especially with HDMI connections.
Troubleshooting problems related to iPod and XM Satellite Radio.
To Next Page
