• To connect the video signal, connect using a 75 £_/ohms video signal cable cord. Using an impreper cable can result in a drop in video quality.
• When making connections, also refer to the operating instructiens of the other compenents.
• The AVR-2805/985 is equipped with a functien fer up-converting video signals.
• The signal connected to the video signal terminal is output to the S-Video and component video menitor out terminals.
• The REC OUT terminals have ne cenversion functien, se when recording only connect the video terminals.
TV oFDBS tuner
L OT
© o©
®
®
[ Connecting a TV or BBS tuner I
TV or DBS
• Connect the TV's or DBS tuner's video output jack (VIDEO OUTPUT) to the
[]_ (yellow) TV or DBS IN jack using a 75 _}/ohms video coaxial pin
plug cord.
• Connect the TV's or DBS tuner's audio output jacks (AUDIO OUTPUT) to
the _ TV or DBS IN jacks using pin plug cords.
VIDEO
[ -- _- _ _ DVD player or wdeo drsc player (VDP/ etc
@_1 _ _-°_t '
_ C_onnecting a DVD player or avideo disc player (VDP) ]
# _ DVD
_ • Connect the video disc player's video output jack (VIDEO OUTPUT) to the _ (yellow) DVD IN
/_ jack using a 75 _,Vohms video coaxial pin plug cord.
• Connect the video disc player's analog audio output jacks (ANALOG AUDIO OUTPUT) to the
DVD IN jacks using pin plug cords.
• VDP can be connected to the VDP jacks in the same way.
I
Videodeck 2
I _ I1_1 ....
ROUTL RIN L OUT IN _ _-_ O
I--AUDIO ,_ VIDEO _
VideodeckI
_AUDIO _ VIDEO _
MONITOR OUT
• Connect the TV's video input jack (VIDEO INPUT) to the
MONITOR OUT jack using a 75 _/ohms video coaxial pin plug
_ cord.
Note on connecting the digital input jacks
• Only audio signals are inputs to the digital input jacks.
For details. (See page 6)
I Connecting a video decks I
• There are two sets of video deck (VCR) jacks, so two video decks can be connected for simultaneous recording or video copying.
Video input/output connections:
• Connect the video deck's video output jack (VIDEO OUT) to the [_ (yellow) VCR-1 IN jack, and the video deck's video input jack (VIDEO IN) to the [_
(yellow) VCR-1 OUT jack using 75 _/ohms video coaxial pin plug cords.
Connecting the audio output jacks
• Connect the video deck's audio output jacks (AUDIO OUT) to the _ VCR-1 IN jacks, and the video deck's audio input jacks (AUDIO IN) to the _ VCR-1
OUT jacks using pin plug cords.
'_ Connect the second video deck to the VCR-2 jacks in the same way.
To Next Page
Loading...
Need help?
General
