Denon AVR-3311 User Manual

107
ENGLISH
Basic versionSimple version Advanced version Information
Surround
Surround mode (vpage45)
Surround Parameter (vpage73)
Tone
z19
(vpage75)
Audyssey Settings
z24
(vpage75)
Audyssey
DSX™
z24 z25
(vpage77)
RESTORER
z23
(vpage78)
AFDM
z11
(vpage74)
S.Back
(vpage74)
F.Height
z17
(vpage74)
Height Gain
z18
(vpage74)
Speaker
(vpage75)
Subwoofer
(vpage75)
PRO LOGIC g/gx Music mode only
NEO:6 Music
mode only
Panorama
(vpage74)
Dimension
(vpage74)
C.Width
(vpage74)
C.Image
(vpage73)
MultEQ
®
XT
(vpage75)
Dynamic EQ
®
z21
(vpage76)
Dynamic
Volume™
z22
(vpage76)
PURE DIRECT
S
z3
DIRECT (2 channel)
S
z3
DIRECT (Multi-channel)
STEREO
SSSS
S
MULTI CH IN
SSSS SSSSS
DOLBY PRO LOGIC gz SS SSSS S
DOLBY PRO LOGIC gx S SSS SSSSSS
DOLBY PRO LOGIC g SS SSS SSSSSS
DOLBY PRO LOGIC
SS SSS SSSSSS
DOLBY PRO LOGIC g A-DSX SSS SSSSSS
DOLBY PRO LOGIC A-DSX
SSS SSSSSS
DTS NEO:6
S SSSSSSS
DTS NEO:6 A-DSX
SSSSSSS
Audyssey DSX
SSSSS
DOLBY DIGITAL
SSSS SSSSS
DOLBY DIGITAL Plus
SSSS SSSSS
DOLBY TrueHD
SSSS SSSSS
DTS SURROUND
SSSS SSSSS
DTS 96/24
SSSS SSSSS
DTS-HD
SSSS SSSSS
DTS Express
SSSS SSSSS
MULTI CH STEREO
SS SSSS S
ROCK ARENA
SS S
z20
SSS S
JAZZ CLUB
SS SSSS S
MONO MOVIE
SS SSSS S
VIDEO GAME
SS SSSS S
MATRIX
SS SSSS S
VIRTUAL
SSSS S
z3 Only when “Subwoofer Mode” is set to “LFE+Main” (vpage80), sound is output from the subwoofer.
z17 If “Speaker Config.” – “F.Height” (vpage80) is set to “None”, this item cannot be selected.
z18
This item can be selected when “Surround Parameter” – “F.Height” (vpage74) is set to “ON”.
z19 This item cannot be set when “Dynamic EQ” (vpage76) is set to “ON”.
z20 In this surround mode, bass is +6 dB, and treble is +4 dB. (Default)
z21 This item cannot be set when “MultEQ XT” (vpage75) is set to “OFF” or “Manual”.
z22 This item cannot be set when “Dynamic EQ” (vpage76) is set to “OFF”.
z23 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
z24 For HD Audio whose sampling frequency of an input signal is more than 96 kHz, this sound parameter cannot be set.
z25 This item can not be selected when “Surround Parameter” – “F.Height” (vpage74) is set to “ON”.

Denon AVR-3311 Specifications

General

Receiver type	Surround
Frequency range	10 - 100000 Hz
Input sensitivity	200 mV
Audio output channels	7.1 channels
Audio A/D Converter (ADC)	24-bit/192kHz
Signal-to-Noise Ratio (SNR)	102 dB
Total Harmonic Distortion (THD)	0.05 %
Power output per channel (1KHz@6 Ohm)	165 W
Power output per channel (20-20KHz@8 Ohm)	125 W
Optical drive included	No
Display	LED
Equalizer	Yes
HDMI version	1.4a
Product color	Silver
Audio decoders	DTS 96/24, DTS-ES (Discrete 6.1), DTS-HD, DTS-HD Master Audio, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD
Volume control	Rotary
Multi-Zone quantity	4
Apple docking compatibility	iPod Classic 4, iPod Classic 5, iPod Mini 1, iPod Mini 2, iPod Nano 1, iPod Nano 2
Supported video modes	1080p
HDMI in	6
Audio (L/R) in	9
Composite video in	5
USB ports quantity	1
S-Video inputs quantity	2
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPG
AM band range	522 - 1611 kHz
FM band range	57.5 - 108 MHz
Composite video out	3
Headphone connectivity	3.5 mm/6.35 mm
Digital audio coaxial out	0
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	670 W

Weight and Dimensions

Depth	381 mm
Width	434 mm
Height	171 mm
Weight	12200 g