Denon AVR-3311 User Manual

108
ENGLISH
Surround
n Types of input signals, and corresponding surround modes
This table shows the input signal that can be played in each surround mode. Check the audio signal of the input source then select the surround mode.
Symbols in the table
F This indicates the default surround mode.
D This indicates the surround mode that is fixed when “AFDM” (vpage74) is set to “ON”.
S This indicates the selectable surround mode.
Surround mode (vpage45)
NOTE
Input signal types and formats
ANALOG
PCM DTS-HD DTS DOLBY DOLBY DIGITAL
LINEAR PCM
(multi ch)
LINEAR PCM
(2ch)
DTS-HD
Master
Audio
DTS-HD
High
Resolution
Audio
DTS
EXPRESS
DTS ES
DSCRT
(With Flag)
DTS ES
MTRX
(With Flag)
DTS
(5.1ch)
DTS 96/24
DOLBY
TrueHD
DOLBY
DIGITAL Plus
DOLBY
DIGITAL EX
(With Flag)
DOLBY
DIGITAL EX
(With no
Flag)
DOLBY
DIGITAL
(5.1/5/4ch)
DOLBY
DIGITAL
(4/3ch)
DOLBY
DIGITAL
(2ch)
DTS SURROUND
DTS-HD MSTR
z5 F
DTS-HD HI RES
z5 F
DTS ES DSCRT6.1
z1z3 F D
DTS ES MTRX6.1
z1z3 F D
DTS SURROUND
z5 SSF
DTS 96/24
z5 F
DTS (–HD) + PLgx CINEMA z2z3 SSSSSSS
DTS (–HD) + PLgx MUSIC z1z3 SSSSSSS
DTS (–HD) + PLgz z4 SSSSSSS
DTS EXPRESS
z5 F
DTS (–HD) + NEO:6
z1z3 SSS
SSS
DTS NEO:6 CINEMA
z5 SS S
DTS NEO:6 MUSIC
z5 SS S
DTS NEO:6 CINEMA A-DSX
SS S
DTS NEO:6 MUSIC A-DSX
SS S
Audyssey DSX
SSSSSSS
DOLBY SURROUND
DOLBY TrueHD
z5 F
DOLBY DIGITAL+
z5 F
DOLBY DIGITAL EX
z1z3 SSSS
DOLBY (D+) (HD) +EX
z1z3 SS
DOLBY DIGITAL
z5 SFFF
DOLBY (D) (D+) (HD) +PLgx CINEMA z2z3 SSF DSSS
DOLBY (D) (D+) (HD) +PLgx MUSIC z1z3 SSSSSS
DOLBY (D) (D+) (HD) +PLgz z4 SSSSSS
DOLBY PRO LOGIC gx CINEMA z1z3 SS S
DOLBY PRO LOGIC gx MUSIC z1z3 SS S
DOLBY PRO LOGIC gx GAME z1z3 SS S
DOLBY PRO LOGIC gz z4 SS S
DOLBY PRO LOGIC g CINEMA z5 SS S
DOLBY PRO LOGIC g MUSIC z5 SS S
DOLBY PRO LOGIC g GAME z5 SS S
DOLBY PRO LOGIC
z5 SS S
z1
If “Speaker Config.” – “S.Back” (vpage80) is set to “None”, this surround mode cannot be selected.
z2 If “Speaker Config.” – “S.Back” (vpage80) is set to “1spkr” or “None”, this surround mode cannot be selected.
z3 This surround mode can be selected when “Amp Assign” (vpage79) is set to “Normal”.
z4 If “Speaker Config.” – “F.Height” (vpage80) is set to “None”, this surround mode cannot be selected.
z5 The same was when “Audyssey DSX™” (vpage77) setting is set to “ON”.

Denon AVR-3311 Specifications

General

Receiver type	Surround
Frequency range	10 - 100000 Hz
Input sensitivity	200 mV
Audio output channels	7.1 channels
Audio A/D Converter (ADC)	24-bit/192kHz
Signal-to-Noise Ratio (SNR)	102 dB
Total Harmonic Distortion (THD)	0.05 %
Power output per channel (1KHz@6 Ohm)	165 W
Power output per channel (20-20KHz@8 Ohm)	125 W
Optical drive included	No
Display	LED
Equalizer	Yes
HDMI version	1.4a
Product color	Silver
Audio decoders	DTS 96/24, DTS-ES (Discrete 6.1), DTS-HD, DTS-HD Master Audio, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD
Volume control	Rotary
Multi-Zone quantity	4
Apple docking compatibility	iPod Classic 4, iPod Classic 5, iPod Mini 1, iPod Mini 2, iPod Nano 1, iPod Nano 2
Supported video modes	1080p
HDMI in	6
Audio (L/R) in	9
Composite video in	5
USB ports quantity	1
S-Video inputs quantity	2
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPG
AM band range	522 - 1611 kHz
FM band range	57.5 - 108 MHz
Composite video out	3
Headphone connectivity	3.5 mm/6.35 mm
Digital audio coaxial out	0
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	670 W

Weight and Dimensions

Depth	381 mm
Width	434 mm
Height	171 mm
Weight	12200 g