Denon AVR-3801 Operating Instructions

26
Multi Vol. Level
Set the multi pre-out output level adjustment.
1
BAND MODE
TUNING
TUNING
At the “System Setup Menu” screen, select “Multi
Vol. Level” and press the ENTER button.
2
3
BAND MODE
TUNING
TUNING
ENTER
SHIFT
Enter the setting.
The “System Setup Menu” reappears.
Select the desired settimg.
0 dB, -40 dB:
The output level is fixed at the set level and the volume can no longer be
adjusted.
Variable:
The level can be adjusted freely using the buttons on the remote control
unit.
Setting the on-screen display (OSD)
• Use this to turn the on-screen display (messages other than the menu screens) on or off.
1
BAND MODE
TUNING
TUNING
At the System Setup Menu select “On Screen Display”.
2
3
ENTER
SHIFT
BAND MODE
TUNING
TUNING
Switch to the On Screen Display screen.
Select “ON” or “OFF”.
ENTER
SHIFT

Denon AVR-3801 Specifications

General

Channels	7.1
Power Output	105 W per channel (8 ohms, 20 Hz - 20 kHz, 0.05% THD)
Frequency Response	10 Hz - 100 kHz (+1, -3 dB)
Total Harmonic Distortion	0.05%
Type	AV Receiver
Input Sensitivity	200 mV (Line)
Input Impedance	47 kOhms (Line)
Output Voltage	1.2 V (Pre Out)
Video Switching	Composite, S-Video
Speaker Impedance	6 - 16 Ohms
Tuning range	FM, AM
Digital inputs/outputs	optical, coaxial
Signal-to-Noise Ratio	100 dB (Line)
Output Impedance	1.2k ohms