30
Operating DENON audio components
1
2
Use the mode selector buttons to select the component you
want to operate.
The mode switches between “AMP”, “TUNER” and
“MULTI” each time the RECEIVER button is pressed,
between “CDR”, “MD” and “TAPE” each time the
CDR/MD/TAPE button is pressed, between “DBS” and
“CABLE” each time the DBS/CABLE button is pressed,
and between “DVD” and “DVD SETUP” each time the
DVD button is pressed, and between “VCR” and “VCR2”
eachtime the VCR button is pressed.
Operate the audio component.
• For details, refer to the component’s operating instructions.
It may not be possible to operate some models.
1. CD player (CD) system buttons 2. Tape deck (TAPE) system buttons
6, 7 : Manual search (forward and reverse)
2 : Stop
1 :Play
8, 9 : Auto search (to beginning of track)
3 : Pause
SKIP +, – : (for CD changers only)
0~9, +10 : 10 key
6 : Rewind
7 : Fast forward
2 : Stop
1 : Forward play
3 : Pause
8 : Reverse play
A/B : Switch between sides A and B
3. MD recorder (MD), CD recorder (CDR) system buttons
6, 7 : Manual search (forward and reverse)
2 : Stop
1 :Play
8, 9 : Auto search (to beginning of track)
3 : Pause
0~9, +10 : 10 key
4. Tuner system buttons
TUNING D, H : Tuning up/down
BAND : Switch between AM and FM bands
MODE : Switch between AUTO and MONO
MEMORY : Preset memory
SHIFT : Switch preset channel range
CHANNEL +, – : Preset channel up/down
1~8 : 10 key
To Next Page
Loading...
Need help?
General
