Denon AVR-982

[1] Playing one source while recording another (REC OUT mode)
1
Press the REC/MULTI button.
REC /
MULTE
(Main unit}
2
With "RECOUT SOURCE" displayed,
turn the FUNCTION knob to select the
source you wish to record.
• The "REC" indicator and the indicator
of the selected source light.
(Mai_ unit}
Set the recording mode.
• For operating instructions, refer to the manual of the
component on which you want to record.
To cancel, turn the function knob and select "SOURCE".
• When "SOURCE" is selected, the "REC" indicator turns
off.
w _lor_
{Ma_n unitl
2,4
1
2
I
Display 2
I
i'='=i'="='='.='='=i _'3" ='="='='=i H'='=='='.i ....
r':. E:.L., L._L._ i .:::,L._L._r':. L., i:::.
NOTES:
• Recording sources other than digital inputs selected in the REC
OUT mode are also output to the multi source audio output
jacks.
• Digital signals are not output from the REC SOURCE or audio
output jacks.
[2] Outputting a program source to an amplifier, etc., in a different room (MULTi mode)
Press the REC/MULTI button.
The display switches as follows each
time the button is pressed.
2
REC /
MULTE
%
(Main unit}
With "M-SOURCE SOURCE" displayed,
turn the FUNCTION knob and select the
source you wish to output.
• The "MULTI" indicator and the
indicator of the selected source light.
(Mai_ unit}
• When the AVR-2802/982 is the REC
OUT mode, the source cannot be
output using the MULTI button on the
remote control unit. (Remoteco_tro_urlJt)
Start playing the source to be output.
• For operating instructions, refer to the manuals of the
respective components.
To cancel, turn the function knob and select "SOURCE".
• When "SOURCE" is selected, the "MULTI" indicator turns
off.
w _lor_
{Ma_n unitl
2,4
1
2
I
Display 2
I
i.,._ ='="='='=i H'='=='='.i "=" ='="='='=i H'='=='='.i ....
NOTES:
• The signals of the source selected in the MULTI mode are also
output from the VCRd, VCR-2/V.AUX and CDR/TAPE recording
output terminals.
• Digital signals are not output from the multi source audio output
jacks.
4O