EasyManuals Logo

Denon AVR-S700W User Manual

Denon AVR-S700W
268 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #139 background imageLoading...
Page #139 background image
o
Dynamic Comp.
Compress dynamic range (difference between loud and soft sounds).
Auto:
Automatic dynamic range compression
on/off control according to source.
Low / Medium / High: These set the compression level.
Off: Dynamic range compression is always off.
0
“Auto” can only be set when Dolby TrueHD signals are input.
0
The default setting is “Off”. When the input signal is Dolby TrueHD source, the
default setting is “Auto”.
o
Low Frequency
Adjust the low frequency effects level (LFE).
-10 dB – 0 dB (Default : 0 dB)
For proper playback of the different sources, we recommend setting to the
values below.
0
Dolby Digital sources : 0 dB
0
DTS movie sources : 0 dB
0 DTS music sources: ]10 dB
o
Center Image
Distributes the dialogue output from the center channel to the front left
and right channels and widens the sound image in the front.
0.0 – 1.0 (Default : 0.3)
0
You can set this when the sound mode is DTS Neo:6 in the “Music” mode.
0
The smaller the value, the more dialogue is concentrated on the center
channel. The larger the value, the more dialogue is distributed to front left and
right channels, and the more the sound image widens in the front.
o
Panorama
The front sound field is expanded further towards the back to create a
seamlessly inclusive sound impression.
On:
Use “Panorama”.
Off
(Default):
Do not use “Panorama”.
You can set this when the sound mode is Dolby PLg/gx in the “Music” mode.
Contents Connections Playback Settings Tips Appendix
139
Front panel Display Rear panel Remote Index

Table of Contents

Other manuals for Denon AVR-S700W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-S700W and is the answer not in the manual?

Denon AVR-S700W Specifications

General IconGeneral
Channels7.2
Power Output per Channel75 W (8 ohms, 20 Hz - 20 kHz, 0.08% THD)
Frequency Response10 Hz - 100 kHz
Total Harmonic Distortion0.08%
Signal-To-Noise Ratio98 dB
Input Impedance47 kOhms
Input Sensitivity200 mV
HDMI Inputs6
HDMI Outputs1
Composite Inputs2
Component Inputs2
Analog Inputs4
Composite Output1
Component Output1
Wi-FiYes
BluetoothYes
AirPlayYes
DLNAYes
HDMI Pass-ThroughYes
HDMI SwitchingYes
3D TechnologyYes
Digital Inputs2 Optical
Supported Audio FormatsDTS-HD Master Audio, Dolby TrueHD
Supported Video Formats4K, 3D
Additional FeaturesAudyssey MultEQ
Tuner Presets56
Dimensions17.1 x 13.3 x 6.6 inches

Related product manuals