Denon AVR-S700W User Manual

Surr.Parameter
You can adjust the surround audio sound field effects to match your
preferences.
The items (parameters) that can be adjusted depend on the signal being
input and the currently set sound mode. For details on the adjustable
parameters, see “Sound modes and surround parameters” (v
p. 217).
0
Some setting items cannot be set while playback is stopped. Make the settings
during playback.
0
“Surr.Parameter” settings are stored for each sound mode.
o
Cinema EQ
Gently softens the upper treble range of movie soundtracks to reduce
possible harshness and improve clarity.
On:
“Cinema EQ” is used.
Off
(Default):
“Cinema EQ” is not used.
o
Loudness Mngmt
This sets whether to output as specified in “Dynamic Comp.” or output
directly without compressing the dynamic range of audio recorded in
the disc.
On
(Default):
Outputs are given based on enabling the
settings made in “Dynamic Comp.” and
“Dialog normalization function”
(v p. 184).
Off:
“Dynamic Comp.” settings and “Dialogue
Normalization” are disabled, and the
signals on the disc are output as is.
You can set this when Dolby TrueHD signals are input.
Contents Connections Playback Settings Tips Appendix
138
Front panel Display Rear panel Remote Index

Denon AVR-S700W Specifications

General

Channels	7.2
Power Output per Channel	75 W (8 ohms, 20 Hz - 20 kHz, 0.08% THD)
Frequency Response	10 Hz - 100 kHz
Total Harmonic Distortion	0.08%
Signal-To-Noise Ratio	98 dB
Input Impedance	47 kOhms
Input Sensitivity	200 mV
HDMI Inputs	6
HDMI Outputs	1
Composite Inputs	2
Component Inputs	2
Analog Inputs	4
Composite Output	1
Component Output	1
Wi-Fi	Yes
Bluetooth	Yes
AirPlay	Yes
DLNA	Yes
HDMI Pass-Through	Yes
HDMI Switching	Yes
3D Technology	Yes
Digital Inputs	2 Optical
Supported Audio Formats	DTS-HD Master Audio, Dolby TrueHD
Supported Video Formats	4K, 3D
Additional Features	Audyssey MultEQ
Tuner Presets	56
Dimensions	17.1 x 13.3 x 6.6 inches