3
Press ZONE2 SOURCE on the main unit to switch the
input source of ZONE2 to “Source”.
If “Source” is selected as the input source of ZONE2, the input
source is changed to mirror that of the MAIN ZONE. “Source” is the
default setting.
0
The following audio signals can be played in ZONE2.
Input
Output
ZONE2
Digital Audio (HDMI)
S
Digital Audio (Optical)
S
Analog Audio
S
USB
S
HEOS Music
S
TUNER
S
Contents Connections Playback Settings Tips Appendix
143
Front panel Display Rear panel Remote Index
To Next Page
Loading...
