Denon AVR-S770H - Adjusting the Volume in ZONE2

Adjusting the Volume in ZONE2
MUTE
:
VOLUME
df
ZONE2
o
Adjusting the volume
1
Press ZONE2 to set the operating zone to ZONE2 with
the remote control.
The ZONE2 button lights.
2
Use VOLUME df to adjust the volume.
0
At time of purchase, “Volume Limit” is set to “70 （–10 dB）”.
(v p. 210)
0
Turn MASTER VOLUME after pressing ZONE2 SOURCE on the main unit
to adjust the volume.
o
Turning off the sound temporarily (Muting)
1
Press ZONE2 to set the operating zone to ZONE2 with
the remote control.
The ZONE2 button lights.
2
Press MUTE :.
0
To cancel mute, either adjust the sound volume or press
MUTE : again.
Contents Connections Playback Settings Tips Appendix
146
Front panel Display Rear panel Remote Index