EasyManuals Logo

Denon AVR-S770H User Manual

Denon AVR-S770H
311 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #188 background imageLoading...
Page #188 background image
GRelation between the “4K/8K Signal Format” setting and supported
resolutionsH
Support
Resolution
Color
Space
Pixel
Depth
4K/8K Signal Format
Standard Enhanced
8K
Enhanced
4K 24Hz,
4K 30Hz,
4K 25Hz
RGB /
YCbCr 4:4:4
8 bit
P P P
10,12 bit
P P
YCbCr 4:2:2 12 bit
P P P
4K 60Hz,
4K 50Hz
YCbCr 4:2:0
8 bit
P P P
10,12 bit
P P
RGB /
YCbCr 4:4:4
8 bit
P P
10,12 bit
P
YCbCr 4:2:2 12 bit
P P
4K 120Hz,
4K 100Hz
YCbCr 4:2:0
8,10,12
bit
P
RGB /
YCbCr 4:4:4
8,10 bit
P
YCbCr 4:2:2 12 bit
P
8K 24Hz,
8K 30Hz,
8K 25Hz
YCbCr 4:2:0
8,10,12
bit
P
RGB /
YCbCr 4:4:4
8,10 bit
P
YCbCr 4:2:2 12 bit
P
8K 60Hz,
8K 50Hz
YCbCr 4:2:0 8, 10 bit
P
0
When setting this to “Enhanced”, we recommend using a “Premium High
Speed HDMI Cable” or “Premium High Speed HDMI Cable with Ethernet” that
has an “HDMI Premium Certified Cable” label attached to the product
package.
0
When setting this to “8K Enhanced”, we recommend using a certified “Ultra
High Speed HDMI cable”.
0
When this setting is “8K Enhanced”, configure the television or playback
device settings to match this setting.
0
When this setting is “8K Enhanced”, video may not be output correctly
depending on the connected playback device or HDMI cable. In this case,
change this setting to “Enhanced” or “Standard”.
0
“Custom” is displayed for the setting item if our service engineers or custom
installers has configured the HDMI signal format for this unit.
0
“4K/8K Signal Format” can also be set by the following procedure. However,
the menu screen is not displayed. Watch the display while configuring the
setting.
1. Switch to the HDMI input source you want to set.
2. Press and hold the main unit’s TUNER PRESET CH + and TUNE + at the
same time for at least 3 seconds.
“4K/8K <Enhanced>” appears on the display.
3. Use the main unit's TUNER PRESET CH + or TUNER PRESET CH – and
select the 4K/8K Signal Format.
4. Press the main unit’s STATUS to complete the setting.
Contents Connections Playback Settings Tips Appendix
172
Front panel Display Rear panel Remote Index

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-S770H and is the answer not in the manual?

Denon AVR-S770H Specifications

General IconGeneral
Channels7.2
HDMI Inputs6
Dolby AtmosYes
DTS:XYes
Wi-FiYes
BluetoothYes
HEOS Built-inYes
Voice ControlAmazon Alexa, Google Assistant, Apple Siri
4K/120Hz Pass-throughYes
8K/60Hz Pass-throughYes
Total Harmonic Distortion0.08% (20Hz-20kHz)
Input Sensitivity/Impedance200mV/47k ohms
Signal-to-Noise Ratio98 dB (IHF-A weighted, Direct mode)
Ethernet PortYes
HDR SupportHDR10+, Dolby Vision, HLG
Frequency Response10Hz-100kHz
USB PortYes
HDMI Outputs1

Related product manuals