Denon AVR-S770H User Manual

o
Firmware
Version:
Displays information for the current
firmware.
DTS Version: Displays the current DTS version.
o
Notifications
Displays and sets notifications.
Also, sets whether or not to display the notification when the power is
turned on.
Notification Alerts
On
(Default):
Notification messages are displayed.
Off: Notification messages are not displayed.
0
Pressing INFO on the remote control switches the display to show information
such as the input source name, the volume, the sound mode name, the video
input/output signals, and other information. The FRL Rate is displayed when the
“4K/8K Signal Format” setting of this unit is “8K Enhanced” and the connected TV
supports FRL transmission mode.
EXT
LFE
SB
SBR
SBL
C
FR
FWR
FHR
FL
FHL
FWL
SR
SL
SW
SBR
SBL
C
FR
FL
SR
SL
40.0
SOURCE Blu-ray
SIGNAL
Dolby Audio - Dolby TrueHD
SOUND
Dolby Audio - TrueHD + DSurr
INPUT
SIGNAL
ACTIVE
SPEAKERS
40.0
AUDYSSEY
SOURCE
Blu-ray
SIGNAL
Dolby Audio - Dolby TrueHD
SOUND
Dolby Audio - TrueHD + DSurr
MultEQ
: Reference
Dynamic
EQ : On
Dynamic
Volume : Medium
:8K24A
:HDR10
:YCbCr
4:2:2/BT.2020
:12bits
:40Gbps
= >8K24A
= >HDR10
= >YCbCr 4:2:2/BT.2020
= >12bits
= >40Gbps
ALLM
SOURCE
Blu-ray
SIGNAL
Dolby Audio - Dolby TrueHD
SOUND
Dolby Audio - TrueHD + DSurr
Resolution
HDR
Color Space
Pixel Depth
FRL Rate
Contents Connections Playback Settings Tips Appendix
216
Front panel Display Rear panel Remote Index

Denon AVR-S770H Specifications

General

Channels	7.2
HDMI Inputs	6
Dolby Atmos	Yes
DTS:X	Yes
Wi-Fi	Yes
Bluetooth	Yes
HEOS Built-in	Yes
Voice Control	Amazon Alexa, Google Assistant, Apple Siri
4K/120Hz Pass-through	Yes
8K/60Hz Pass-through	Yes
Total Harmonic Distortion	0.08% (20Hz-20kHz)
Input Sensitivity/Impedance	200mV/47k ohms
Signal-to-Noise Ratio	98 dB (IHF-A weighted, Direct mode)
Ethernet Port	Yes
HDR Support	HDR10+, Dolby Vision, HLG
Frequency Response	10Hz-100kHz
USB Port	Yes
HDMI Outputs	1