EasyManuals Logo

Denon AVR-X1100W User Manual

Denon AVR-X1100W
248 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #158 background imageLoading...
Page #158 background image
9
Move the Sound calibration microphone to position 2,
select “Continue”, then press ENTER.
The measurement of the second position starts.
Measurements can be made in up to eight positions.
.
Place the microphone ear level at the 2nd listening position,
which should be no more than 60cm away from the 1st
position, then select “Continue”...
Ear Height
Audyssey Setup
ContinueBack
To skip measuring the second and subsequent listening position, press o to
select “Complete” and press ENTER to proceed to step 12.
n
Stopping Audyssey
®
Setup
A
Press BACK to display the popup screen.
B
Press o to select “Yes”, then press ENTER.
10
Repeat step 9, measuring positions 3 to 8.
11
Select “Complete”, then press ENTER.
.
Audyssey Setup
ContinueRepeat Last Test
Measurements Complete
Select “Continue” to analyze the data...
Start the analysis and storage of the measurement results.
0
Analysis takes several minutes to complete.
The more speakers and measurement positions that there are,
the more time it takes to perform the analysis.
NOTE
When the measurement results are being saved, make sure the power is not
turned off.
Contents Connections Playback Settings Tips Appendix
158
Front panel Display Rear panel Remote Index

Table of Contents

Other manuals for Denon AVR-X1100W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X1100W and is the answer not in the manual?

Denon AVR-X1100W Specifications

General IconGeneral
Receiver typeSurround
Audio output channels7.1 channels
Power output per channel (1KHz@6 Ohm)145 W
Power output per channel (20-20KHz@8 Ohm)80 W
HDMI in5
Digital audio optical in2
Ethernet LAN (RJ-45) ports1
Headphone connectivity6.3 mm
Connectivity technologyWired
Speakers connectivity typeBanana connector/Binding posts
Audio formats supportedAAC, AIFF, FLAC, MP3, WAV, WMA
Ethernet LANYes
AM band range522 - 1611 kHz
Supported radio bandsAM, FM
Optical drive includedNo
DisplayVFL
Product colorBlack
Audio decodersDolby Digital 5.1, Dolby Digital EX, Dolby Pro Logic IIz, Dolby TrueHD, DTS 96/24, DTS Digital Plus, DTS-ES, DTS-HD Master Audio
Apple docking compatibilityiPhone, iPod
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.1 W
Power consumption (typical)430 W
Weight and Dimensions IconWeight and Dimensions
Depth339 mm
Width434 mm
Height151 mm
Weight8600 g

Related product manuals