Denon AVR-X1100W

z1
This item can be selected when a Dolby TrueHD signal is played.
z2
This item can be selected when Dolby TrueHD, Dolby Digital or DTS signal is played.
z3
This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.
z4
This setting is available when the set sound mode name contains “+PLg
z”.
z5 This setting is available when “Subwoofer Mode” in the menu is set to “LFE+Main”. (v
p. 169)
z6 This item cannot be set when “Dynamic EQ” is set to “On”.
(v
p. 142)
z7
This item cannot be set when Audyssey
®
Setup (Speaker Calibration) has not been performed.
z8
This item cannot be set when “MultEQ
®
XT” is set to “Off”. (
v
p. 141)
z9
This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
z10
In this sound mode, bass is +6 dB, and treble is +4 dB. (Default)
Contents Connections Playback Settings Tips Appendix
217
Front panel Display Rear panel Remote Index