Denon AVR-X1400H Troubleshooting Guide

To limit the Video/Audio output try the (EDID) or HDCP method to properly display picture on the TV and to correct sound issues.
Limit Mode Menu
The AV Receiver has various options for Limit Mode.
These limit modes are stored for each Video input source.
0
Front panel display sample (e.g.AVR-X2400H)
.
1 Source:CBL/SAT
Item Description
1 Source Select
(Source)
The input source can be changed from this menu.
2 Max Resolution
(MaxRes.)
Sets the video input/output resolution restrictions supported by
the AV receiver.
3 HDCP2.2
(HDCP)
This sets the HDCP limit of the AV Receiver to HDCP ver. 1.4.
This can be set for any input with HDMI assigned to it.
4 HDR
This limits (disables) the HDR capability of the AV Receiver.
This can be set for any input with HDMI assigned to it.
5 Deep Color
(DeepC)
This limits (disables) Deep Color capability of the AV
Receiver.
This can be set for any input with HDMI assigned to it.
6 Dolby Vision
(DolbyV)
This limits (disables) the Dolby Vision capability of the AV
Receiver.
This can be set for any input with HDMI assigned to it.
7 DTS:X This limits (disables) DTS:X capability.
This can be set for any input with HDMI assigned to it.
Item Description
8 Dolby Atmos
(Atmos)
This limits (disables) Dolby Atmos capability.
This can be set for any input with HDMI assigned to it.
9 PCM 2ch only
(PCM2ch)
This limits the audio input capability to PCM 2ch only.
This can be set for any input with HDMI assigned to it.
When PCM 2ch only is set, DTS:X and Dolby Atmos are also
restricted.
10 Reset The setting content of Limit Mode is initialized.
11 Exit Exit Limit Mode and return to HDMI DIAGNOSTICS mode.
Source Selection
You can switch inputs to check other video sources.
The input source encoder on the unit or remote control unit can be used to change
the input source.
When the current input source is audio only, with no video assignment, "Audio" is
displayed.
Introduction How to operate Cable Test Limit mode Log & EDID Troubleshooting
12

Denon AVR-X1400H Specifications

General

Receiver type	Surround
Frequency range	20 - 20000 Hz
Pre-out channels	2 SW
Input sensitivity	200 mV
Pre-out connectivity	Yes
Audio output channels	7.2 channels
Signal-to-Noise Ratio (SNR)	98 dB
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (1KHz@6 Ohm)	145 W
Power output per channel (20-20KHz@8 Ohm)	80 W
HDMI in	6
Digital audio coaxial in	0
Ethernet LAN (RJ-45) ports	1
Multichannel audio input type	RCA
Component video (YPbPr/YCbCr) in	2
Headphone connectivity	3.5 mm
Connectivity technology	Wired & Wireless
Speakers connectivity type	3.5mm
Audio formats supported	ALAC, DSD, FLAC, MP3, WAV
Display	VFL
HDCP version	2.2
Apple docking	No
Product color	Black
Audio decoders	DTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby Surround
Volume control	Rotary
Center speaker impedance	16 Ω
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Internet radio services supported	Deezer, Napster, Pandora, SIRIUS Internet Radio, Spotify, Tidal, iHeartRadio
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	430 W
Supported video modes	720i, 720p, 960p, 1080i, 1080p, 2160p
Supported graphics resolutions	3840 x 2160
Certification	CE, EAC

Weight and Dimensions

Depth	339 mm
Width	434 mm
Height	151 mm
Weight	8500 g