Denon AVR-X3200W Service Manual

Sound mode
Surround Parameter
Tone
z7
Audyssey
Restorer
z10
Center Spread DTS Neural:X
MultEQ® XT
z8
Dynamic EQ
z9
Dynamic Volume
z9
Direct/Pure Direct (2-channel) z5
Direct/Pure Direct (Multi-channel) z5
DSD Direct (2-channel)
DSD Direct (Multi-channel) z5
Stereo
SSSSS
Multi Ch In
SSSS
Dolby Surround
SSSSSS
DTS Neural:X
SSSSS
Dolby Digital
SSSS
Dolby Digital Plus
SSSS
Dolby TrueHD
SSSS
Dolby Atmos
SSSS
DTS Surround
SSSS
DTS 96/24
SSSS
DTS-HD
SSSS
DTS Express
SSSS
DTS:X
SSSSS
Multi Ch Stereo
SSSSS
Rock Arena
SSSSS
Jazz Club
SSSSS
Mono Movie
SSSSS
Video Game
SSSSS
Matrix
SSSSS
Virtual
SSSSS
z
5,
z
7 -
z
10: “Sound modes and surround parameters”
z1
This item can be selected when the Dolby Digital, Dolby Digital Plus, Dolby TrueHD or Dolby Atmos signal is played back.
z2
This item can be selected when the Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS:X or DTS is played back.
z3
This item can be selected when a DTS:X signal that is compatible with the Dialog Control function is input.
z4
This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.
z5
During playback in Pure Direct mode, the surround parameters are the same as in Direct mode.
z6 This setting is available when “Subwoofer Mode” in the menu is set to “LFE+Main”.
z7 This item cannot be set when “Dynamic EQ” is set to “On”.
z8
This item cannot be set when Audyssey
®
Setup (Speaker Calibration) has not been performed.
z9
This item cannot be set when “MultEQ
®
XT” is set to “Off”.
z10
This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
Types of input signals, and corresponding sound modes
F This indicates the default sound mode.
S This indicates the selectable sound mode.
Sound mode NOTE
langis lennahc-itluMlangis lennahc-2
Analog /
PCM
Dolby
Digital
(+/HD)
DTS
(-HD)
DSD
(Super
Audio
CD)
PCM
Multi
DTS:X
DTS-
HD
DTS
Express
DTS ES
Dscrt6.1
DTS ES
Mtrx6.1
DTS
Dolby
Atmos
Dolby
TrueHD
Dolby
Digital
Plus
Dolby
Digital
(EX)
DSD
(Super
Audio
CD)
DTS Surround
DTS:X MSTR / DTS:X
F
DTS-HD MSTR
Fz3
DTS-HD HI RES
Fz4
DTS ES Dscrt6.1
z2 F
DTS ES Mtrx6.1
z2 F
DTS Surround
S S F
DTS 96/24
Fz5
DTS Express
F
DTS (-HD) + Neural:X
S S S S S
DTS Neural:X
S F S
Dolby Surround
Dolby Atmos z1 F
Dolby TrueHD
Sz6 S
Dolby Digital+
Sz7 S
Dolby (D+) (HD) + Dolby Surround
F F F
Dolby Digital
S
Dolby Surround
S F S
z
1 –
z
7 : “Types of input signals, and corresponding sound modes”
86

Denon AVR-X3200W Specifications

General

Receiver type	Surround
Input sensitivity	200 mV
Audio output channels	7.2 channels
Signal-to-Noise Ratio (SNR)	100 dB
Power output per channel (1KHz@6 Ohm)	180 W
Power output per channel (20-20KHz@8 Ohm)	105 W
HDMI in	8
Audio (L/R) in	5
Composite video in	3
USB ports quantity	1
Component video (YPbPr/YCbCr) in	2
12V trigger	Yes
Speakers connectivity type	-
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Internet radio services supported	vTuner
Optical drive included	No
Display	LCD
Product color	Black
Audio decoders	DTS-HD Master Audio, Dolby Surround, Dolby TrueHD
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (typical)	650 W

Weight and Dimensions

Depth	388 mm
Width	434 mm
Height	167 mm
Weight	11300 g