4. Protection Pass Mode 5. Network Initialization Mode
4.1. Actions
• This mode allows the power to be turned on without activating protections.
• This mode functions in the same way as normal power-on, except that protections are not activated.
• When using the protection pass mode, do not connect speakers to the speaker terminals.
4.2. Operations
While holding down buttons "
ZONE3 SOURCE
", "
STATUS
" and "
CURSOR
0
" simultaneously, press
the power button to turn on the power.
The device returns to the normal display message after the following is displayed.
L1
Protection Pass
This is displayed for 5 seconds before returning to the normal display.
5.1. Actions
The following items are initialized.
(1) Network setup
(2) Friendly Name
(3) Auto Update setting
(4) Allow Update setting
(5) Time Zone setting
(6) Queue list
(7) Internet Radio recently played station
(8) Quick Select playback station
(9) AirPlay Password
(10) Bluetooth Pairing History
(11) Crestron Connected Setup
5.2. Operations
When the power is on and the input source is HEOS Music, press and hold the "
CURSOR
1
" and
"
DIMMER
" buttons for more than 3 seconds.
Initializing Display
L1
Network Reset...
Complete Display
L1
Completed
This is displayed for 5 seconds before returning to the normal display.
Before Servicing
This Unit
Electrical Mechanical Repair Information Updating
159
To Next Page
Loading...
Need help?
General
Weight and Dimensions
