Denon DN-700C

12
Getting started
Part names
and functions
Connections Control functionSetting Defaults
File and folder
settings
Playback Information
NOTE
•Do not plug in the power cord until all connections have been
completed.
•When making connections, also refer to the operating instructions of
the other components.
•Insert the plugs securely. Loose connections will result in the
generation of noise.
•Be sure to connect the left and right channels properly (left with left,
right with right).
•Connect the output correctly.
•Do not bundle power cords together with connection cables. Doing
so can result in humming or noise.
Preparations
Cables used for audio connection
Select the cables according to the equipment being connected.
Audio cables
Analog Connection (RCA)
(White)
(Red)
R
L
R
L
Stereo audio cable (Sold separately)
Digital Connection (RCA)
Coaxial digital cable (Sold separately)
Analog Connection (XLR), Digital Connection (XLR)
Balanced cable (Sold separately)
Connections
Audio connections
Analog connection (unbalanced connection)
Connect a line level analog cable to the analog output (unbalanced)
terminal.
AUDIO
RL
IN
R
L
R
L
Amp
Mixer
Pre-amp
Analog connection (balanced connection)
Connect the analog output (balanced) terminal to a line level analog
input.
AUDIO
RL
IN
1:GND
2:Hot
3:Cold
Amp
Mixer
Pre-amp
Digital connection (COAXIAL)
Connect the COAXIAL digital output terminal to a digital input terminal.
DIGITAL
IN
Mixer
Recorder
Digital connection (AES/EBU)
Connect the AES/EBU digital output terminal to a digital input terminal.
DIGITAL
IN
Mixer
Recorder