Denon DN-700C

49
Getting started
Part names
and functions
Connections Control functionSetting Defaults
File and folder
settings
Playback Information
700 Series Extended Communication
Format
n Controlling the DN-700C externally
DN-700C
Host device
Control
Command
Control commands are commands such as play, stop etc. sent from
the controller to control the DN-700C.
n Status information output for external status
request commands
DN-700C
Host device
Status Information
Command
Status Request
Command
The status request command is a command used to obtain status
information from the DN-700C. When the DN-700C receives a status
request command, it uses a status information command to notify its
status.
Serial remote control function
n Automatic output of status information when the
DN-700C status changes
DN-700C
Host device
Status
Command
The status notification command is automatically generated when the
DN-700C changes status. The status notification uses an information
command to notify the host of the status.