11
SPECIAL MODE
Special mode setting button
Plug AC cord into power outlet while pressing buttons A and B.
Each button continue to press until the turning on ON/STANDBY LED.
No. Mode Button A Button B Contents
1 Initialization mode (Factory Reset) SOURCE CURSOR
f
Initializing. Factory Reset
2 Initialization mode (User Reset) SOURCE ENTER Initializing. (Contents User's Guide is published)
3 Version display CURSOR
d
NA Version Display
4 Product mode 1 SOURCE CURSOR
1
Factory use.
5 Prodcut mode 2 SOURCE CURSOR
0
Factory use.
6 Protection history mode SOURCE CURSOR
d
Protection history view and reset
7 DPMS update mode CURSOR
0
ENTER DPMS Up date Mode
8 Update mode (by DFW) CURSOR
d
ENTER Development/Fuctory use. The details cannot be disclosed.
9 MAC Address rewrite mode CURSOR
1
ENTER Development/Fuctory use. The details cannot be disclosed.
10 Access to development server mode CURSOR
f
ENTER Development/Fuctory use. The details cannot be disclosed.
ON/STANDBY
LED
CURSOR f ENTERCURSOR 0
CURSOR d
CURSOR 1SOURCE
To Next Page
Loading...
